User:Muppet9010
 |
Muppet9010 |
|
Using an unfiltered deconstruction planner to queue orders for construction robots. |
|
|
Stack size |
1 |
|
Prototype type |
|
|
Internal name |
deconstruction-planner |
|
Required technologies |
|
|
None required |
|
The deconstruction planner is an item which allows the player to mark tiles and entities, including trees, rocks, cliffs, fish and items on the ground, for removal. By default, tiles are only marked when no entities are found. Tiles or entities queued for deconstruction will be marked with a red 'X'. When within the range of construction robots they will be removed by the robots and the resulting items stored in logistic network chests or, when a personal roboport is used, the player's inventory. Ghosts will be removed immediately. Anything marked for deconstruction will immediately stop functioning, as if no longer there. Deconstruction orders can be cancelled prior to the removal of the target. The deconstruction planner can be used unfiltered (blank) to remove all entities or tiles within its selection area, or it can be filtered to specific targets.
Usage
Getting a deconstruction planner
A planner can be obtained by:
- Clicking the red deconstruction planner icon (
) in the shortcut bar. (Available once construction robotics is researched in at least one game.) - Pressing the keyboard shortcut assigned to Make new deconstruction planner; default: ALT + D.
- Opening the blueprint library and selecting New deconstruction planner.
- Importing a deconstruction planner string.
Once a new planner is in the hand it can be used immediately and then deleted by pressing Q to clear the hand. Alternatively, it can be dropped into the player's inventory for later use. Once in the inventory it can be pinned to a quickbar slot.
Accessing settings
The planner must be in an inventory in order for its configuration to be changed. Settings can be accessed by clicking Right mouse button on a planner's icon, either in the inventory or on a quickbar link.
A full description of available settings and filters can be found under configuration and filtering.
Deleting a planner
A planner that has been stored in an inventory can be deleted by clicking the red trash-can icon labelled Destroy deconstruction planner ( 
) in the top right of its settings window.
Care should be taken when the planner has been configured as this operation is performed immediately without confirmation and cannot be undone.
Using the deconstruction planner
With a planner held in the hand the player can click-drag it (Left mouse button is held down while moving the mouse) over existing structures and ghosts to mark them for deconstruction. A tooltip appears indicating what will be removed.
The planner can be used anywhere on the map where the player has radar coverage (map view).
Once Left mouse button is released the deconstruction planner will take effect according to the rules listed below.
Dragging a deconstruction planner.
The tooltip shows what will be removed.
Red Xs indicate queued deconstruction orders. Ghosts were immediately removed.
Effects of deconstruction
The following describes the possible results of using a deconstruction planner in the game world:
- Any selected entity ghosts and tile ghosts will be immediately removed.
- Any selected entities and tiles will be queued for deconstruction, indicated with a red X.
- Anything queued for deconstruction will stop functioning; for example transport belts will stop moving, assembling machines will cease producing items, walls can be walked through, and so on.
- If the deconstruction orders are within the construction area of construction robots the orders will be added to the bots' queue and will be removed in due course:
- Bots will fly in and remove all entities and tiles and place the resulting items in logistic network chests, or the player's inventory when the bots flew from a personal roboport.
- Where there are items to be removed - for example being carried by transport belts or stored inside a chest or assembling machine - these will also be picked up by bots and placed in the appropriate storage.
- Items must be removed before the entities that carry or hold them. For example if a wooden chest holding 500 iron plates is marked for removal, the plates will be picked up first and only when all have been removed will the bots deconstruct the chest itself.
- Environmental entities such as trees, rocks and fish are handled in the same way, except bots collect and store the resource items they leave behind.
- Cliffs are a special case: they are destroyed by bots carrying cliff explosives and do not yield any item to be stored.
Cancelling deconstruction orders
Queued deconstruction orders can be cancelled by holding Shift while click-dragging a deconstruction planner over the affected area.
When Shift is held down the area selection border will change from red to blue to indicate cancellation mode is in effect.
Undo
The undo tool can be used to revert the actions of a deconstruction planner. This applies both to pending deconstruction orders and completed removals.
Undo is triggered by pressing Control + Z (on macOS: Command + Z)
Performing an undo will cancel any queued removal orders (red Xs) that have not yet been actioned. Any ghosts that were removed will be immediately replaced. Where built entities and tiles have already been removed the undo will reinstate them in the form of new ghosts that can then be re-built by any construction robots in range.
Items that were removed as part of the deconstruction - for example the inventory of chests or items carried by a transport belt - will not be restored by an undo. This means that a deconstruction that consisted exclusively of items, for example picking up stone from the ground, cannot be undone.
It is also not possible to undo the removal of trees, rocks, cliffs and fish.
Cancelling deconstruction orders by dragging with Shift held down. The entities start working when the deconstruction is cancelled.
Using then undoing a deconstruction planner. Deconstruction markers are cancelled, ghosts re-appear, and removed entities are reinstated as new ghosts for bot rebuilding.
Valid targets
The deconstruction planner can remove player-built entities, entity ghosts, tiles, tile ghosts and loose items. In addition, it can remove trees, rocks, cliffs and fish.
Tiles
Tiles are treated differently to entities, entity ghosts and tile ghosts. By default a deconstruction planner will not select any tiles unless the area selected contains only tiles; whenever one or more entities, entity ghosts or tile ghosts is included, tile selection is disabled. This is done to allow the player to use a deconstruction planner to remove entities that are placed on top of path tiles (such as concrete) without the floor always being removed as well.
When the user wishes to select tiles in areas where other objects also exist the deconstruction planner configuration must be changed as described in the next section.
Environmental entities
These are handled in the same way as entities and tiles placed by the player: they are marked with a red X and construction robots will remove them. A difference with environmental entities is that bots will collect resources rather than the entity itself, such as wood from trees and stone from rocks.
The removal of cliffs requires that the bots have access to cliff explosives. Cliffs do not leave behind any resource.
The ability to use a deconstruction planner to remove and collect fish provides a convenient way for a player equipped with a personal roboport to replenish their stocks of healing items even in the middle of combat. Fish marked with a deconstruction planner will stop moving.
Configuration and filtering
A new deconstruction planner is blank, meaning it removes according to a pre-defined set of rules. The planner can optionally be edited to provide a custom list of removal rules which control which types of entities and tiles will - or won't - be removed. These rules are called filters.
A filtered planner will show its filtered items on its icon. Up to the first four filters will be shown.
Blank planner rules
A blank planner will select:
- Any entities and entity ghosts, including trees, rocks, cliffs and fish;
- Tile ghosts;
- Or, if and only if no entities, entity ghosts and tile ghosts are found, it will instead select tiles.
These rules are the base point from which a filtered planner can then be customized.
Filter settings window
The deconstruction planner interface is divided into two sections: entities and tiles.
The entities tab.
The tiles tab.
Principles of filtering
Each tab consists of 30 slots in which an entity or tile can be chosen. When one or more slots is filled the planner becomes filtered and will now act according to those filters.
A set of filters is either a whitelist or blacklist, and this is set with a toggle at the top of each tab. The default is whitelist. In whitelist mode the planner will act only upon those items selected in the filter slots. For example if laser turret is added in the Entities tab, the planner will now only remove laser turrets and will ignore all other entities and tiles. This is useful to remove specific entities that are no longer required. For example, a player could filter a deconstruction planner to remove all kinds of turret, walls and gates and use this to remove defensive structures that have been made redundant by new defenses built nearer to enemies.
In blacklist mode the opposite applies: the planner will now mark all items except those filtered. A common example of using a blacklist is excluding power poles and roboports, allowing the removal of any and all production facilities without affecting the surrounding infrastructure. This is often especially important for roboports as they may be required to support the construction bots that are executing the deconstruction orders.
Setting and removing filters
Clicking any slot with Left mouse button will open the Set the filter window in which the desired item can be chosen. Alternatively, an item in the hand can be clicked into a slot to filter on that item.
A filter is removed by clicking on a filled slot with Right mouse button.
Entities tab
In the entities tab the user can select items to filter from the follow categories:
- Environment
- Logistics
- Production
- Combat
- Unsorted
Logistics, production and combat will be familiar to the player from the item selection window. Environment and unsorted are unique to the deconstruction planner.
The environment tab lists cliffs, fish, and every individual kind of tree and rock. This facilitates filtering on specific environmental entities if desired.
Trees/rocks only toggle
At the top of the entities tab is the Trees/rocks only tick-box. With this enabled the deconstruction planner will filter on all items listed in the Environment section, and the filter slots will be disabled. The Whitelist/Blacklist toggle is still in effect and controls whether the planner selects only environmental entities, or selects everything but them.
Special items in the Unsorted section
The unsorted section provides four special items, each using a red X icon.
- Entity ghost: To filter on any type of entity ghost, separate from constructed entities.
- Item on ground: Loose items on the ground, such as dropped by the player, spilled from removing armor, and stones dropped from destroyed rocks. Does not include items on transport belts.
- Item request slot: Filters on the pending addition of items such as modules to assembling machine 2 or electric furnace. This would also target fuel queued for addition to a locomotive. Does not target items already installed, only those waiting to be added following the placement of a blueprint or as a result of an undo operation.
- Tile ghost: As with entity ghost, this will target tile ghosts separately from constructed tiles. If the user wants a deconstruction planner that only removes tile ghosts, they can place this item as an entity filter. If they want a filter that removes all types of tiles and tile ghosts, they should add Tile ghost under Entities and then set the Tiles tab drop-down to 'Always'.
Tiles tab
Clicking a filter slot will bring up the Set the Filter window showing the available tiles. Landfill is included in the list but has no function as landfill cannot be removed once placed.
At the top of the Tiles tab is a drop-down that controls constructed tile removal behavior. It has four options:
- Normal: The default. Constructed tiles are removed only when no entities, entity ghosts or tiles ghosts are found in the deconstruction area.
- Always: Constructed tiles are always removed, even if the deconstruction planner also selects entities or entity ghosts. Tile ghosts are not selected unless Tile ghost is added under the Entities tab.
- Never: Constructed tiles are never removed, even if they are the only object selected. Tile ghosts are not selected unless Tile ghost is added in the Entities tab.
- Only: Constructed tiles are always removed, and nothing else will be. Entities, entity ghosts and tile ghosts will be ignored. The Entities tab is effectively disabled when this mode is selected.
The deconstruction planner always follows the settings of this drop-down, regardless of any filters set in the Tiles tab. For example if a user wishes to configure a planner that removes both walls and concrete, they must first set those filters in the Entities and Tiles tabs, and then also set the Tiles drop-down to Always. Without changing the drop-down the planner would only select concrete in places where no entities, entity ghosts or tile ghosts were found, as per the rules described under Normal in the above list.
Clearing all filters and configuration
All configuration can be removed from a planner by holding Shift while clicking on its icon with Right mouse button. This returns it to the blank, unfiltered state.
Exporting and importing with strings
The settings for a deconstruction planner can be exported in string form.
Clicking the Export to string button ( 
) in the top right of the planner edit window will pop up a window containing the Deconstruction item string. This string can be copied to the operating system clipboard, from where it could be saved to a text file or uploaded to a website.
To import a deconstruction planner the player can click the Import String icon on the shortcut bar ( 
) or choose the same option from the blueprint library. A dialogue box will appear into which the string can be pasted. This will result in a deconstruction planner appearing on the hand with the same configuration as the one that was exported.
The export/import process can be used to copy deconstruction planners between games and to other players.
Achievements
|
Automated cleanup Deconstruct 100 objects with the construction robots. |
History
- 0.17.0:
- Added cliffs as a valid deconstruction target.
- 0.15.0:
- Blueprint library: Allows for keeping players blueprints between individual game saves and allows sharing blueprints in multiplayer games.
- Added ability to export and import blueprints, blueprint books, and deconstruction planners as strings.
- Blueprints, blueprint books and deconstruction planners are obtainable from the library GUI with no crafting cost.
- 0.13.0:
- Several non-stackable items can be swapped directly with counterparts, this includes the deconstruction planner.
- 0.11.15:
- When using the deconstruction planner, the logistic network is not drawn if the mouse is over a GUI element.
- 0.11.0:
- Added a cancel deconstruction option to the deconstruction planner.
- 0.9.0:
- Introduced
See also
|
Production items |
|
|---|---|
|
Tools |
|
|
Furnaces |
|
|
Space related |
|
