Pumpjack: Difference between revisions
(updated to 0.15 using the updated crude oil numbers) |
(mild cleanup.) |
||
| Line 2: | Line 2: | ||
{{:Infobox:Pumpjack}} | {{:Infobox:Pumpjack}} | ||
'''Pumpjacks''' extract [[Crude oil|crude oil]] from oil fields. Each oil field can be covered by only one pumpjack at a fixed spot. The pumpjack will then output an amount of crude oil per cycle equal to 10 multiplied by the field's yield (e.g. 54 crude oil for 538% yield) per second. Without speed | '''Pumpjacks''' extract [[Crude oil|crude oil]] from oil fields. Each oil field can be covered by only one pumpjack at a fixed spot. The pumpjack will then output an amount of crude oil per cycle equal to 10 multiplied by the field's yield (e.g. 54 crude oil for 538% yield) per second. Without [[speed module]]s, one pumpjack cycle takes one second to complete. | ||
Extracting oil lowers the field's yield by 1% per 300 pumpjack cycles to a minimum of 20% of the initial yield or 2 oil per second, whichever is larger. | Extracting oil lowers the field's yield by 1% per 300 pumpjack cycles to a minimum of 20% of the initial yield or 2 oil per second, whichever is larger. They are limited to a maximum output of 100 crude oil per cycle, achieved by an oil field with more than 999% yield. However, such a high yield is fairly rare with standard [[map generator]] settings. | ||
Pumpjacks output tile location is fixed relative to its orientation and cannot be placed on a non-oilfield tile. | |||
Pumpjacks output tile location is fixed relative to its orientation | |||
== Tips == | == Tips == | ||
If oil fields are depleted ( to the minimum of 20% ) speed [[ | If oil fields are depleted (to the minimum of 20%) speed [[module]]s are a good option to raise the pumpjacks output. With two speed module 3's the output doubles from 2 to 4 crude oil per second and even more when using additional [[beacon]]s, plus another 0.5 oil per beacon per second. | ||
The formula to determine the modified output is: | The formula to determine the modified output is: | ||
Output of unmodified oil field * ( | Output of unmodified oil field * (number of modules in pumpjack * bonus from module) + output of unmodified oil field * (number of beacons * (number of modules * distribution efficiency) * bonus from module + 1). | ||
{| class="wikitable" | {| class="wikitable" | ||
!colspan="2" | Example | !colspan="2" | Example | ||
|- | |- | ||
|For 1 pumpjack on a depleted oil field with two | |For 1 pumpjack on a depleted oil field with two level 3 speed modules and 6 beacons with each two level 3 speed modules: | ||
|2 * ( 2 * 0,5 ) + 2 * ( 6 * ( 2 * 0,5 ) 0,5 + 1 ) = 10 Crude oil per 1 second. | |2 * (2 * 0,5) + 2 * ( 6 * ( 2 * 0,5 ) 0,5 + 1 ) = 10 Crude oil per 1 second. | ||
|- | |- | ||
|Assuming that there will be always 2 modules equipped in pumpjack and beacons, formula can be shortened : | |Assuming that there will be always 2 modules equipped in the pumpjack and beacons, the formula can be shortened: | ||
|2 + 2 * ( 6 * 0,5 + 1 ) = 10 | |2 + 2 * (6 * 0, 5 + 1) = 10 crude oil per second. | ||
|} | |} | ||
Revision as of 10:30, 5 December 2018
 |
Pumpjack |
|
Recipe |
|
     |
|
|
Total raw |
|
  |
|
Recipe |
|
|
|
|
|
Total raw |
|
|
|
|
Map color |
|
|
Fluid storage volume |
1000 |
|
Health |
200 |
|
Stack size |
20 |
|
Dimensions |
3×3 |
|
Energy consumption |
90 kW (electric) |
|
Mining time |
0.5 |
|
Mining speed |
1 |
|
Mining area |
1 tiles |
|
Pollution |
10/m |
|
Module slots |
2 slots |
|
Prototype type |
|
|
Internal name |
pumpjack |
|
Required technologies |
|
 |
|
|
Boosting technologies |
|
 |
|
|
Produced by |
|
    |
|
Pumpjacks extract crude oil from oil fields. Each oil field can be covered by only one pumpjack at a fixed spot. The pumpjack will then output an amount of crude oil per cycle equal to 10 multiplied by the field's yield (e.g. 54 crude oil for 538% yield) per second. Without speed modules, one pumpjack cycle takes one second to complete.
Extracting oil lowers the field's yield by 1% per 300 pumpjack cycles to a minimum of 20% of the initial yield or 2 oil per second, whichever is larger. They are limited to a maximum output of 100 crude oil per cycle, achieved by an oil field with more than 999% yield. However, such a high yield is fairly rare with standard map generator settings.
Pumpjacks output tile location is fixed relative to its orientation and cannot be placed on a non-oilfield tile.
Tips
If oil fields are depleted (to the minimum of 20%) speed modules are a good option to raise the pumpjacks output. With two speed module 3's the output doubles from 2 to 4 crude oil per second and even more when using additional beacons, plus another 0.5 oil per beacon per second.
The formula to determine the modified output is:
Output of unmodified oil field * (number of modules in pumpjack * bonus from module) + output of unmodified oil field * (number of beacons * (number of modules * distribution efficiency) * bonus from module + 1).
| Example | |
|---|---|
| For 1 pumpjack on a depleted oil field with two level 3 speed modules and 6 beacons with each two level 3 speed modules: | 2 * (2 * 0,5) + 2 * ( 6 * ( 2 * 0,5 ) 0,5 + 1 ) = 10 Crude oil per 1 second. |
| Assuming that there will be always 2 modules equipped in the pumpjack and beacons, the formula can be shortened: | 2 + 2 * (6 * 0, 5 + 1) = 10 crude oil per second. |
History
- 0.15.0:
- Pumpjacks can be turned on and off using the circuit network. They can also output the current oil mining rate.
- 0.9.0:
- Introduced
See also
|
Production items |
|
|---|---|
|
Tools |
|
|
Furnaces |
|
|
Space related |
|
