Accumulator

The Basic accumulator stores a limited amount of energy when available production exceeds demand, and releases it in the opposite case. The basic accumulator stores up to 5 MJ of energy. Charge/Discharge rate is 300 kW maximum.

Recipe:	File:Iron-plate.png 2 + 5 + 0.5 => File:Electric-energy-acumulators.png 1
Total raw:	File:Copper-plate.png 5 File:Iron-plate.png 7 File:Sulfuric-acid.png 10
Maximum capacity:	5 MJ
Charge/discharge rate:	300 kW
Req. Technology:	File:Electric-energy-acumulators.png 1 Electric energy accumulators 1

See How to switch off steam engines in the night, when enough accumulator capacity is available?

• When discharged above maximum speed by multiple unconnected poles, will distribute energy unequally (some may get 100% demand, others 0%)
• May be used to provide limited amount of power (multiples of maximum charge rate) to a section of the grid
• Produces light when charging and discharging
• Can act as a emergency backup for your base in case of blackout, until main power supply is restored
• Can act as a "surge protector" (if power usage of one device exceeds production for a few seconds or so, the basic accumulator will compensate for this and provide power to the grid until said device shuts down or requires a lesser power requirement)

See also

• Electric network
• Solar panel

Examples

High density accumulator array consisting of 48 basic accumulators and a Substation providing 240 MJ capacity.

Template:MachineNav