In other languages: Deutsch Français Italiano 日本語 한국어 Polska Русский 中文

Inserters: Difference between revisions

From Official Factorio Wiki
Jump to navigation Jump to search
m (→‎Special behavior: removed outdated links)
(Updated Inserter Speed and Extension Speed sections for 0.14)
Line 5: Line 5:
'''Inserters''' are devices which are used to move items over short distances. When placed, they have a fixed direction. They can move items from behind and place them in front of them. By doing this, they can move items from one transport belt to another, but also extract items from, and insert items into machines or storage devices. There are seven types of inserters, all requiring electricity to run (except the Burner Inserter, which burns [[Fuel|fuel]]).
'''Inserters''' are devices which are used to move items over short distances. When placed, they have a fixed direction. They can move items from behind and place them in front of them. By doing this, they can move items from one transport belt to another, but also extract items from, and insert items into machines or storage devices. There are seven types of inserters, all requiring electricity to run (except the Burner Inserter, which burns [[Fuel|fuel]]).


== Types of inserters ==
== Types Of Inserters ==


* [[Burner inserter]] - The only [[fuel]]-powered inserter.
* [[Burner inserter]] - The only [[fuel]]-powered inserter.
Line 33: Line 33:
Inserters act differently depending on what they are moving items to/into so as not to monopolize all of the items being picked up. This allows other machines and inserters on the same transport belt to pick up a share of the items. If two inserters are picking up from the same tile, the first placed inserter has priority.
Inserters act differently depending on what they are moving items to/into so as not to monopolize all of the items being picked up. This allows other machines and inserters on the same transport belt to pick up a share of the items. If two inserters are picking up from the same tile, the first placed inserter has priority.


==Insertion limits==
==Insertion Limits==
Inserters will stop inserting items into certain buildings if they already have enough of that item. For example, if a boiler has 5 or more items of fuel in it, an inserter will not insert additional fuel. When the fuel drops below 5 items, the inserter will continue to insert more fuel, up to the limit of 5 items.
Inserters will stop inserting items into certain buildings if they already have enough of that item. For example, if a boiler has 5 or more items of fuel in it, an inserter will not insert additional fuel. When the fuel drops below 5 items, the inserter will continue to insert more fuel, up to the limit of 5 items.


Line 54: Line 54:
An inserter that takes items from an object containing [[Storage/Stack|stacks]] of items (such as a chest) can overfill the target building due to the [[Inserter item stack size bonus]] research. Overfilling can also happen if  multiple inserters are used to insert items into one building.
An inserter that takes items from an object containing [[Storage/Stack|stacks]] of items (such as a chest) can overfill the target building due to the [[Inserter item stack size bonus]] research. Overfilling can also happen if  multiple inserters are used to insert items into one building.


==Inserters and transport belt interaction ==
==Inserters And Transport Belt Interaction ==
[[Transport belts]] have two lanes on which items can travel. Inserters only place items onto one side of the belt. Which side they place it on depends on the orientation of the inserter and the belt, as described below.
[[Transport belts]] have two lanes on which items can travel. Inserters only place items onto one side of the belt. Which side they place it on depends on the orientation of the inserter and the belt, as described below.


Line 71: Line 71:




== Potential issues ==
== Potential Issues ==
Inserters may have problems picking up items:
Inserters may have problems picking up items:


* From very fast belts, because the items are moving too quickly. ([[Inserter|basic inserters]] cannot pick up from [[express transport belt]] for example)
* From very fast belts, because the items are moving too quickly. ([[Inserter|basic inserters]] cannot pick up from [[express transport belt]] for example)
* From the entry or exit of an underground belt (because the time they have to pick up is shorter)
* From the entry or exit of an underground belt (because the time they have to pick up is shorter)
* From turning belts if the item is on the far side.
* From turning belts if the item is on the inside of the corner


==Inserter Item Stack Size Bonus==
==Inserter Item Stack Size Bonus==
Line 82: Line 82:
If an inserter moves items from inventory to inventory (for example from an assembler into a chest), or (as of v0.13) from an inventory to a belt, it is able to transport more items at once. The secret behind this is the [[Inserter item stack size bonus]] research.
If an inserter moves items from inventory to inventory (for example from an assembler into a chest), or (as of v0.13) from an inventory to a belt, it is able to transport more items at once. The secret behind this is the [[Inserter item stack size bonus]] research.


==Power usage==
==Power Usage==
* Electric inserters drain energy even when they are not moving, as idle power
* Electric inserters drain energy even when they are not moving, as idle power
* The amount of energy used is the same for every movement
* The amount of energy used is the same for every movement
Line 88: Line 88:




==Inserter speed==
==Inserter Speed==
 
<span style="color:#FF0000">'''MAINTAINER NOTE: The below info (up to [[Inserters#Rotation_speed|Rotation speed]]) has not been updated to reflect v0.13. Values will likely not be correct, and must be re-tested.''' </span>
 
{| class="wikitable"
{| class="wikitable"
! Type
! Type
Line 98: Line 95:
! Game-second per full turn<br/>Game-seconds per Tile
! Game-second per full turn<br/>Game-seconds per Tile
|- align="center"
|- align="center"
| align="left"| {{imagelink|burner-inserter|Burner inserter}} || 0.01<br/>0.02 || 0.6<br/>1.2 || 1.667<br/>0.833
| align="left"| {{imagelink|burner-inserter|Burner Inserter}} || 0.01<br/>0.0214 || 0.6<br/>1.284 || 1.667<br/>0.833
|- align="center"
|- align="center"
| align="left"| {{imagelink|basic-inserter|Basic inserter}} || 0.014<br/>0.03 || 0.84<br/>1.8 || 1.191<br/>0.56
| align="left"| {{imagelink|basic-inserter|Basic inserter}} || 0.014<br/>0.03 || 0.84<br/>1.8 || 1.191<br/>0.56
|- align="center"
|- align="center"
| align="left"| {{imagelink|long-handed-inserter|Long handed inserter}} || 0.02<br/>0.04 || 1.2<br/>2.4 || 0.833<br/>0.416
| align="left"| {{imagelink|long-handed-inserter|Long handed inserter}} || 0.02<br/>0.0457 || 1.2<br/>2.742 || 0.833<br/>0.416
|- align="center"
|- align="center"
| align="left"| {{imagelink|fast-inserter|Fast inserter}} || 0.04<br/>0.07 || 2.4<br/>4.2 || 0.417<br/>0.238
| align="left"| {{imagelink|fast-inserter|Fast inserter}} || 0.04<br/>0.07 || 2.4<br/>4.2 || 0.417<br/>0.238
|- align="center"
|- align="center"
| align="left"| {{imagelink|smart-inserter|Smart inserter}} || 0.04<br/>0.07 || 2.4<br/>4.2 || 0.417<br/>0.238
| align="left"| {{imagelink|stack-inserter|Stack inserter}} || 0.04<br/>0.07 || 2.4<br/>4.2 || 0.417<br/>0.238
|-align="center"
| align="left"| {{imagelink|Stack_filter_inserter|Stack filter inserter}} || 0.04<br/>0.07 || 2.4<br/>4.2 || 0.417<br/>0.238
|-
|-
|}
|}


===Rotation speed===
===Rotation Speed===
Convention: 2π rad = 100% of a circle rotation = '''1 turn''' (or one full rotation).
Convention: 2π rad = 100% of a circle rotation = '''1 turn''' (or one full rotation).


Note: an Inserter doesn't always need to make full turns. When grabbing from a transport belt, it is slightly faster when grabbing items from the closest lane.
Note: an Inserter doesn't always need to make full turns. When grabbing from a transport belt, it is slightly faster when grabbing items from the closest lane.


===Extension speed===
===Extension Speed===
The extension-speed is normally not visible (only when compared to other inserters), but there are measurable speed differences when taking - for example - from the near or the far side of a belt.
The extension-speed is normally not visible (only when compared to other inserters), but there are measurable speed differences when taking - for example - from the near or the far side of a belt. Also Some mods can alter the pickup and drop locations of inserters, making this stat more relevant.
 
This effect is also important for [[Railway network/Train station|Train stations]], when unloading items from wagons, because the inserter needs to stretch out to the center of a wagon, which is some tiles long and leads to visible slower speed.
 
The extension speed is especially important for [http://www.factorioforums.com/forum/viewtopic.php?f=8&t=9244 train unloading].


==Inserter throughput==
==Inserter Throughput==


<span style="color:#FF0000">'''MAINTAINER NOTE: The below info (up to [[Inserters#See_also|See also]]) has not been updated to reflect v0.13. Values may not be correct, and should be re-tested.''' </span>
<span style="color:#FF0000">'''MAINTAINER NOTE: The below info (up to [[Inserters#See_also|See also]]) has not been updated to reflect v0.13. Values may not be correct, and should be re-tested.''' </span>
Line 148: Line 143:




==See also==
==See Also==
* [[Electric network]]
* [[Electric network]]
* [[Transport network]]
* [[Transport network]]

Revision as of 12:27, 13 January 2017


For the common yellow electrical inserter, see Inserter.

Inserters are devices which are used to move items over short distances. When placed, they have a fixed direction. They can move items from behind and place them in front of them. By doing this, they can move items from one transport belt to another, but also extract items from, and insert items into machines or storage devices. There are seven types of inserters, all requiring electricity to run (except the Burner Inserter, which burns fuel).

Types Of Inserters


Mechanics

Inserters will:

  • Pick up Items off the ground, off of a Transport belt, or from any object that has storage space, including chests, furnaces and assembling machines.
  • Place the item onto the ground, onto a transport belt, or into any object that has storage space.
  • Inserters can place items on all types of conveyor belts.
  • Try to pick up items from all types of belts (as of v0.12 there is no limitation anymore).
  • Inserters will run at slower speeds when starved for energy.

Inserters will not:

  • Pick up any items that can not be inserted into the connected entity.
  • Pick up items into an entity with a full inventory.
  • Place more than one item at a time onto the same ground tile.
  • Place items into a stack limited inventory, beyond the stack limit (red slots).


Inserters act differently depending on what they are moving items to/into so as not to monopolize all of the items being picked up. This allows other machines and inserters on the same transport belt to pick up a share of the items. If two inserters are picking up from the same tile, the first placed inserter has priority.

Insertion Limits

Inserters will stop inserting items into certain buildings if they already have enough of that item. For example, if a boiler has 5 or more items of fuel in it, an inserter will not insert additional fuel. When the fuel drops below 5 items, the inserter will continue to insert more fuel, up to the limit of 5 items.

This is to allow for all machines to receive their share of items. The common limits on insertion are shown in the table below.

Entity Item type Inserter limit Comment
Boilers, Burner inserters, Furnaces Fuel 5
Gun turrets Bullet Magazines 10 Since v0.8.4. Allows for 100 shots before depleting.
Assembling machines Items needed for the recipe Double the number of items needed in the recipe
Furnaces Items needed for the recipe Double the number of items needed in the recipe
Labs Science packs Double the number of items needed for one research point

An inserter that takes items from an object containing stacks of items (such as a chest) can overfill the target building due to the Inserter item stack size bonus research. Overfilling can also happen if multiple inserters are used to insert items into one building.

Inserters And Transport Belt Interaction

Transport belts have two lanes on which items can travel. Inserters only place items onto one side of the belt. Which side they place it on depends on the orientation of the inserter and the belt, as described below.

  • Inserters will always place the item on the furthest lane.
  • Inserters prefer taking items from the nearest lane. If the nearest lane is empty, the inserter will take from the far lane.
  • If a belt is in the same orientation as the inserter, the item will be placed on the right-hand lane, from the belt's perspective.
  • If the item is placed on a corner piece, it will be put on the inside of the curve, regardless of orientation.


Potential Issues

Inserters may have problems picking up items:

  • From very fast belts, because the items are moving too quickly. (basic inserters cannot pick up from express transport belt for example)
  • From the entry or exit of an underground belt (because the time they have to pick up is shorter)
  • From turning belts if the item is on the inside of the corner

Inserter Item Stack Size Bonus

If an inserter moves items from inventory to inventory (for example from an assembler into a chest), or (as of v0.13) from an inventory to a belt, it is able to transport more items at once. The secret behind this is the Inserter item stack size bonus research.

Power Usage

  • Electric inserters drain energy even when they are not moving, as idle power
  • The amount of energy used is the same for every movement
  • The Burner inserter does not drain energy when idle, but uses more energy when it is active. It is quite useful for situations where the inserter does not need to move very often.


Inserter Speed

Type Rotation-speed (turns per Tick)
Extension-speed (Tiles per Tick)
Turns per Game-second
Tiles per Game-second
Game-second per full turn
Game-seconds per Tile
Burner Inserter 0.01
0.0214
0.6
1.284
1.667
0.833
Basic inserter 0.014
0.03
0.84
1.8
1.191
0.56
Long handed inserter 0.02
0.0457
1.2
2.742
0.833
0.416
Fast inserter 0.04
0.07
2.4
4.2
0.417
0.238
Stack inserter 0.04
0.07
2.4
4.2
0.417
0.238
Stack filter inserter.png
Stack filter inserter
0.04
0.07
2.4
4.2
0.417
0.238

Rotation Speed

Convention: 2π rad = 100% of a circle rotation = 1 turn (or one full rotation).

Note: an Inserter doesn't always need to make full turns. When grabbing from a transport belt, it is slightly faster when grabbing items from the closest lane.

Extension Speed

The extension-speed is normally not visible (only when compared to other inserters), but there are measurable speed differences when taking - for example - from the near or the far side of a belt. Also Some mods can alter the pickup and drop locations of inserters, making this stat more relevant.

Inserter Throughput

MAINTAINER NOTE: The below info (up to See also) has not been updated to reflect v0.13. Values may not be correct, and should be re-tested.

For an inserter removing items from a chest and placing them on a straight, empty belt (experimentally measured to ±0.004, valid at least thru 0.12.33):

Type Items per Game-second
Inserter facing East/West/South
Items per Game-second
Inserter facing North
Burner inserter 0.588 0.579
Basic inserter 0.831 0.820
Long handed inserter 1.153 1.129
Fast inserter 2.306 2.220
Smart-inserter.png
Smart inserter
2.306 2.220

Actual rates may vary for different types of transfers (see also the note about inserter paths in the inserter speed section above).


See Also

Special behavior