切换语言: Deutsch English Español 日本語 한국어 Polska Português do Brasil Русский

Power production/zh: Difference between revisions

From Official Factorio Wiki
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
{{languages}}
{{languages}}
[[Electricity/zh|电力]]和[[Liquids/zh|液体]]有很多共同点,when thinking for energy production, which cannot be handled on one of these subpages, cause they are a special case of the general.


[[Electric network/zh|电力网络]]和[[Liquid network/zh|液体网络]]有很多相交点,这里只收集关于电力生产的的相关点
这个页面是一个概述和关于电力生产的问题汇总。
== 需要多少供水泵和锅炉? ==


== 建造发电系统 ==
* [[Power production/Optimal ratios/zh|最佳配比]]


=== 需要多少水泵和锅炉 ===
== 为何生产的电力不足? ==
一台[[Offshore Pump/zh|水泵]]能为13(最大负载为99%)或14台(负载100%)锅炉和10[[Steam engine/zh|汽轮机]],每台汽轮机全速运行需要1.31个锅炉支持。


锅炉的热水可以存入[[Storage Tank/zh|储液罐]]中,如果有太阳能电场接入供电的话,在早上可以储存多余的热水,用于晚上太阳能电厂停工后维持大消耗的供电。同样,也需要同样的[[Basic accumulator/zh|储电池]]来储存电力。
* [[Power production/Checklists/zh|错误表]]看看你可能做错了什么。


关于水泵,锅炉,汽轮机的部署讨论可以查看论坛:http://www.factorioforums.com/forum/viewtopic.php?f=5&t=3094 。
== 为何产生了负反馈? ==


== 生产足够的能量?检查下 ==
* [[Power production/Checklists/zh|错误表]]
*汽轮机连接上[[Electric network/zh|电力网络]]没有?没有的话,汽轮机会有电力警告图标闪烁,表示未连接上电力网络。添加些[[Power pole/zh|电线杆]]在汽轮机旁并且是线路连接上用电机械上。
*是否建立了基础的液体传输网络?
*水泵足够没有?1个水泵可以供应9个汽轮机。不要在一条管道上使用超过3个水泵,管道没有足够能力运送这么的水。
*有水流过管道不?可以看一下管道上的观察窗,可以在接入汽轮机前铺设两段管道,其中一段会显示观察窗,作为水的监视器。
*有足够的锅炉?水温需要达到100度,当系统重启时保证锅炉能启动燃烧的(如果运作的话,会发出亮光)。


== 储电池的更多用法 ==
== 蓄电池还能用来干什么? ==


=== 关键时期减少能耗 ===
* [[Power production/Special accumulator usages/zh|蓄电池的特殊用途]]
[[Electric network#Storage|Accumulator]]s can be used to limit the need for power for some parts of your factory.


There are naturally 3 items, which are good candidates for that:
== 怎样储存电力? ==


* [[Radar]]
* [[Energy and Work/zh#做功的种类|做功的种类]]
* [[Lab]]s
* [[Electric furnace]]/[[electric mining drill|miner]]


How does it work?
== 蓄电量足够的时候,如何在夜间关闭汽轮机? ==


An accumulator has a lower delivery priority than any other power-using entity, this guarantees, that it receives only energy, when you have enough. At the same time it can deliver energy in another electric network. Both facts together works in this case as a regulated transformer and delivers only energy into other networks, if you are producing enough. Or in other words: in a power shortage, only the unimportant parts of your factory stop - not the whole factory.
* [[Power production/Dealing with priorities/zh|控制优先级]]


This is fine if you want to guarantee that basic functions of your factory keep working (lasers, ammo production, very dependent on your priorities) no matter how much power usage you add.
== 各种用电器、发电机应有怎样的优先级? ==


This especially makes sense for radars - the radar explores new parts of the map, and consumes a large amount of energy. It makes sense to limit it, because when you are low on energy exploring is the least important thing.
* [[Power production/Dealing with priorities/zh|控制优先级]]


In general this is a technique which works well only when you just researched accumulators and solar panels, but don't have enough resources to build big solar farms and accumulator farms.
== 电力系统信息页展示了什么? ==


- todo : pics from a radar station, research labs and electric furnace behind an accu. -
''移至[[Electricity/Electric network infoscreen/zh|电力系统信息页]].


=== 最小化使用蒸汽发电 ===
== 怎么建造电线杆? ==


* http://www.factorioforums.com/forum/viewtopic.php?f=8&t=5585
* [[Electricity/Distribution/zh|配电器]]


=== 连接网络 ===
== 我能独立放置电线吗? ==


http://www.factorioforums.com/forum/viewtopic.php?f=8&t=4814
* [[Electricity/Distribution/zh|配电器]]


== 储存能量的方法 ==
== 怎么减慢生产/研究的速度? ==


When it is about storing energy for later there are two questions:
* [[Power production/Special accumulator usages/zh|蓄电池的特殊用途]]
* Which technology level is needed?
* How much afford to built the structure up?


== 能否储存热水? ==


Dependent of the current technology-level this is a list of how you can store energy:
* [[Power production/Storing hot water/zh|储存热水]]


* Principle: Adding lots of pipes and use much more steam-engines as really needed. Pipes store some energy, of course very little, but much enough to handle short energy drops of some seconds. In every case the over-usage of your energy production might be easier visible, if clever planned.
== 太阳能电厂如何工作? ==
* As soon as you have oil-tanks, you can store quite significant amounts of hot water in them. See [http://www.factorioforums.com/forum/viewtopic.php?f=6&t=4770&hilit=+water#p36469 this article].
* This techniques stretches the time you can burn coal for you energy need, but sooner or later you will switch to accumulators. See [[Power_Production#Solar_Farming|Solar Farming]].
* Sooner or later you will also [[Power_Production#How_to_switch_off_steam_engines_in_the_night.2C_when_enough_accumulator_capacity_is_available.3F|switch of the steam engines, when you don't need them]].
* With small pumps you can control the flow of water. See [[Power_Production#Storing_hot_water|below]].


== 如何让蒸汽机自动在晚上运作,在足够的储电池支持下?==
* http://www.factorioforums.com/forum/viewtopic.php?f=8&t=1865
有些时候,我们有足够的太阳能板和电池后,希望将热力发电系统作为后备电力供应,例如在漫漫长夜中。正常情况下是不可能的,因为汽轮机的供电级别高于储电池的,只有当没有足够的电力供应才开始放电,否则保持充电状态。这意味着,当夜幕降临,汽轮机就会立即启动来保持电池充电。


但你可以使用这样技巧:
==怎样建立液体网络? ==


[[File:T&T electric network1.jpg|700px]]
* [[Liquids/Tutorials/zh|指导]]


左方的电池同时为检测器和主电力网供电。检测器的拣出臂由主电网供电,不断从智能箱拣出物件放到运输带上;拣入臂由检测电池供电,不断将运输带上的物品拣入智能箱。在正常供电的情况,箱子里保持有物件,智能箱通过红绿现网络控制热力发电系统的锅炉燃料拣入臂停止加载燃料。
== What are power modules? ==


当夜幕降临太阳能板停止供电后,电池开始输出供电,左方电池很快会消耗殆尽,检测器的拣入臂会停止工作,拣出臂会将箱子的物件全部排出,而没有物件。这样锅炉燃料拣入臂就可以开始工作,拣入燃料启动锅炉。
* [[Power production/Modules/zh|插件]]


作为例子,我们只以控制一个锅炉为例。实际上可以使用红绿现网络控制更多的燃料拣入臂运作。


在这个例子上,由于检测电池同时处于两个供电网络之间,消耗会略微较快,而且为了方便主电网的运行情况,最好将其置于主供电网的引入出口出做检测。
{{Special:PrefixIndex/{{FULLPAGENAME}}/}}
 
你可以在检测供电网上加多些灯,和往箱子里投入合理量的物件来控制箱子的排空程度,来修正供电网络的准确启动情况。从而在快要达到启动条件之前热力发电系统能完全启动。
 
===一些例子===
[[File:Autoshutoff2.png|300px|thumb|The red circle is the "sensor". Watch the green wires going to the inserters.]]
 
 
===注意===
*关于部署多个智能臂的技巧:
设置好第一个智能臂的判断并连上电缆后,shift加右击复制为模版,同时左右击在新位置就能部署相同设置的智能臂,同时并自动连上电缆。
 
最好使用蓝图实现,但在线缆上会有一些小问题。
 
 
<br clear=all>
 
== 如何查看当前的电力网络的信息?==
 
[[File:Electric_Network_Info.jpg|700px|电力网络信息界面]]
 
左点击任何一个电力输送装置(如电线杆或变电站)都可以打开。
 
'''注意:这个界面只会显示该电力输送装置所接入的电力网络的信息。''',不同于产品信息(按“P”键),电力网络信息不是全局的,是基于接入网络的。
 
#'''消耗量''':当前电力消耗,这个状态条'''一般情况'''下是满的,否则意味着产电量不足以应付生产消耗。
#'''产电量''':当前发电产量,这个状态条'''一般情况'''下是不满的,意味着产电量满足生产消耗。
#'''储电量''':当前接入该网络的储电池的储电量,单位为焦耳,对应为1秒1瓦,对应参见[[wikipedia:zh:焦耳]]。
#'''时间轴''':对应下面曲线图的时间跨度。
#'''消耗详情''':从高到低列出生产消耗的具体设备与总消耗量。
#'''生产详情''':从高到低列出电力生产的具体设备与总生产量。
#'''消耗折线图''':显示不同消耗设备在时间轴控制的消耗统计折线图。
#'''生产折线图''':显示不同消耗设备在时间轴控制的消耗统计折线图。
 
注意,折线图统计的是所有现时接入线网的总和,也就是限显示在详情的所有总量瓦除以时间轴的商,这意味如果某种建筑未被完全拆除时仍算入详情数中。
 
== 如何设置电线杆? ==
 
<!--- covering, rules with the length between poles etc. - todo --->
 
== 如何自己部署电缆? ==
 
所有电缆都能通货shift左击鼠标从电线杆上移除,而铜线和红绿线电缆都能通过左键链接到电线杆上。
 
== 如何减速研究和生产==
 
<!--- Mainly about using different networks, networks connected with accus to limit power - todo --->
 
==太阳能电场 ==
 
http://www.factorioforums.com/forum/viewtopic.php?f=8&t=1865
 
 
== 液体网络 ==
There are some points, which can show you, what needs or can be changed in the liquid network:
* If your steam engines can keep up 510 W of output during heavy load (when electric poles display satisfaction below 100%), it is safe to add more engines.
* If an engine displays a temperature below 100 degrees, add more boilers.
* If you look into the engines and the available energy is below 100%, add boilers/pumps or add a new line to your power plant.
* If needed energy is much below the available energy, all is fine.
* There are also tricks to avoid using too much power. See [[Electric network]].
 
=== 储存热水===
 
http://www.factorioforums.com/forum/viewtopic.php?f=8&t=3724

Revision as of 01:20, 9 August 2015

电力液体有很多共同点,when thinking for energy production, which cannot be handled on one of these subpages, cause they are a special case of the general.

这个页面是一个概述和关于电力生产的问题汇总。

需要多少供水泵和锅炉?

为何生产的电力不足?

为何产生了负反馈?

蓄电池还能用来干什么?

怎样储存电力?

蓄电量足够的时候,如何在夜间关闭汽轮机?

各种用电器、发电机应有怎样的优先级?

电力系统信息页展示了什么?

移至电力系统信息页.

怎么建造电线杆?

我能独立放置电线吗?

怎么减慢生产/研究的速度?

能否储存热水?

太阳能电厂如何工作?

怎样建立液体网络?

What are power modules?